Electric hand drill BLDC
Product Highlights:
1. General
Semi-automatic hand drill uses DC brushless motor, non-inductive square wave control mode. The main control chip adopts PYF32F030 as the main control, PY32F030 adopts ARM M0 architecture, the maximum clock frequency is 48M, 12bit high speed ADC, and 1 advanced timer and 4 general timers, and equipped with 3 channels DMA. high performance main control resources, low price of the main control IC, so that this power tool program has a very high cost performance.
2. Specifications
Model: PY32F030
Working voltage: 20V
Maximum speed: 23000RPM
Charging method: with 95VF rechargeable battery
Power: 410W
3. Product photos
4. Application scenarios
drill
5. Characterization
Throttle speed control: 5 levels of torque adjustment
Over-voltage protection: 20V over-voltage protection
Undervoltage protection: 13V undervoltage protection
Blocking protection: blocking for 3 seconds triggers the protection mechanism to stop the machine
Overcurrent protection: three-level overcurrent protection, 100A trigger instant overcurrent protection
Temperature protection: 75 degrees
Control mode: non-inductive square wave
Motor type: lithium battery
[Can be adjusted according to customer needs]
6. Dimensional specifications
The size of the power tool PCB is 50mm (±0.2mm) * 60mm (±0.2mm), and the dimensions are labeled as shown below:
7. Description of interfaces
P1 pin: +5V
P2 pin: SWD
P3 pin:SWC
P4 pin:GND
8. Anomaly Indicator Description
Over-temperature protection: Illuminated lamp blinks 3 times
Blocking protection: light flashes 4 times
Overcurrent protection: light blinks 5 times
Overvoltage: Illuminator blinks 7 times
Undervoltage: light blinks 8 times
The above is Antai electronic microcontroller development engineers share Electric hand drill BLDC, if you need more Electric hand drill BLDC product information, please call the official website: 0755-82809743, or click “Contact Us”, our customer service personnel will provide you with more detailed answers.